Cajhen d.o.o.

This was the first event of its kind organized under our auspices. The truck featuring the latest tools from our partner, Kennametal, which transforms into a mobile exhibition space, made a stop in our area at the Celje Fairgrounds.

During the event, we showcased innovative cutting tools from Kennametal, sought the most efficient solutions, exchanged experiences, and enjoyed a pleasant gathering.

We sincerely thank all the attendees for their participation!

Kennametal Roadshow Celje - an event organized by Cajhen company.

Learn more about Kennametal >

At Cajhen, we are the official partner for selling their products in Slovenia.

Kennametal Innovative Cutting Tools Roadshow

With this machine, we can achieve the highest precision while maintaining high productivity. The machine possesses some excellent features, such as linear drives, exceptional rigidity, and temperature stability, which are characteristic of products from this CNC machine manufacturer. This is the first machine of its kind in Slovenia.

Learn more about our technologies and our manufacturing process.

We Have Enhanced Our Machinery Fleet

In the international Supplier Assurance evaluation, which assesses companies' sustainability practices, we received a high rating of B 83 on July 24, 2023. We can proudly say that we are well above the industry average, compared to other Slovenian companies, and within the category of companies with 10-49 employees.

The evaluated categories within SAQ 5.0 are as follows:

Company management,
Human rights and labor conditions,
Health and safety,
Business ethics,
Environment,
Responsible supply chain management, and
Responsible resource management.

We are delighted that our dedication and efforts in these areas have been recognized and rewarded with such recognition! This rating enhances our company's reputation and opens doors to new international partnerships.

Received a High Supplier Assurance Rating

They are convinced that it is very important to offer a comprehensive range of high-quality products that will satisfy all circular saw blade needs.

Their focus and mission is to improve the quality of helping customers solve their cutting problems.

Check the types of saws and their technical properties. This will make it easier for you to find the right one for your needs.

Julia HSS >

HSS Vapo

This is not a P.V.D coating, but a superficial CO2 steam oxide treatment with 2 microns penetration, suitable for cutting normal steel. The oxide surface treatment eliminates the tension during the working session, improves the cooling, and reduces the friction.

Link (Toothing Chart and Pin-holes Chart): www.juliautensili.com/hss-circular-saws/

HSS Ultra

Using this very special product, it is usually possible to achieve better results than with TCT carbide saw blades. Julia recommends ULTRA to cut very hard steel in the automotive industry, for stainless steel, titanium, etc.
The most important features of this product are:

Special HSS steel saw blade with hardness above 950 HV and extra fine grain
Innovative multilayer PVD coating with a surface hardness higher than 3650 HV.
Production process with very tight manufacturing tolerances
Teeth with a specific profile for high-performance cuts
Restricted “side-runout” tolerances always apply with Ultra.

The result: Hardness, tenacity, finish, and durability – all you need for an excellent cut.
Link (Brochure): www.juliautensili.com/hss-circular-saws/

HSS Silver Fox

P.V.D Multi-layer coating with a thickness of 2,5 microns, opaque grey colored. The particular composition and the innovative mix of noble elements developed by our R&D achieves a hardness that is higher than 3.650 Vickers (Hv 0,05), unattained by any other coating. This new coating is very tenacious and very resistant to high temperatures. These features are very important to guarantee a long life when using circular saw blades with high-speed parameters. It is highly recommended for circular saw blades to work with critical cutting parameters on high-performance machines. The friction coefficient of 0,40 allows the use of circular saws both for cutting without coolant, or micro-nebulization, as well as for cutting with plenty of coolant. It’s suggested for cutting high alloy steels up to 1000 N/mm2, stainless steel, and all materials developing a high thermal energy.

Link (Toothing Chart and Pin-holes Chart): www.juliautensili.com/hss-circular-saws/

HSS Red Dragon

Multilayer P.V.D coating with 2.5-micron depth. It is obtained from a plasma with a particular titanium, carbon, and acetylene composition. This composition gives the coating a very low friction coefficient of 0.18 together with a considerable hardness of deposited layer 3,200 Vickers. (HV 0.05). These two characteristics guarantee the circular blades will be high-performance with low wear, and also ensure an improvement in the cut’s finish. It is a coating with an oxidation temperature of 470°C and therefore must be used with abundant lubrication. It is particularly suitable for cutting stainless steel, titanium, and hardened steel, along with brass and copper.

Link (Toothing Chart and Pin-holes Chart): www.juliautensili.com/hss-circular-saws/

HSS Yellow Tiger

P.V.D Coating with 3-micron depth titanium base, which is obtained at a process temperature of approximately 490°C. It guarantees a coefficient of friction of 0.47 and a maximum oxidation temperature of 640°. The hardness of the coated layer reaches 2,480 Vickers (Hv 0.05). Its low thermal conductivity guarantees a high heat shield which protects the hardened steel base.
This coating is suitable for cutting medium steel and must always be used with plenty of lubrication. It is not suitable for copper, brass, or bronze cutting.

Link (Toothing Chart and Pin-holes Chart): www.juliautensili.com/hss-circular-saws/

HSS Grey Shark

P.V.D. Coating with 2.5-micron depth. It is obtained by a plasma of titanium and carbon that enhances the hardness to 3,000 Vickers (Hv 0.05). The friction coefficient 0.22 is very low thanks to the large quantity of carbon. This characteristic makes it very suitable for cutting very abrasive materials such as stainless steel and alloyed steels with a hardness of up to 800 N/mm². The low coefficient of friction drastically reduces the chip welding on the cutting edge or in the disc sidewall. This coating should always be used with plenty of lubrication during the cutting operation – it has a low oxidation temperature (400°C).

Link (Toothing Chart and Pin-holes Chart): www.juliautensili.com/hss-circular-saws/

HSS Black Hawk

P.V.D Multilayer coating with a depth of 3 microns. The plasma is obtained by the fusion of a titanium cathode and aluminium, in a particular percentage composition. The addition of inert gas during the process, and the energy source with which the molecules are loaded, enable surface bombardment of the coating, resulting in excellent coating properties that guarantee a high thermal resistance to the sublayer; it has in fact, a oxidation temperature of 800°C obtaining a superficial hardness of 3,400 Vickers (Hv 0,05). The friction coefficient is 0.45 which enables the use of circular saws with excellent results with limited or minimum lubrication or micro-fog nozzle. It is particularly suitable for high alloy steel, up to 1100 N/mm², for cast iron cutting, stainless steel, and all materials that develop high heat energy.

Link (Toothing Chart and Pin-holes Chart): www.juliautensili.com/hss-circular-saws/

HSS Evolution

This product is recommended to cut carbon steel and stainless steel. The most important characteristics of the EVOLUTION circular saw blades are:

Special HSS steel with high wear resistance and extra fine grain
Multilayer PVD coating with a surface hardness higher than 3400 HV.
Special production process with very tight manufacturing tolerances
Side run out and flatness are very low

Link (Brochure): www.juliautensili.com/hss-circular-saws/

Julia TCT >

List krožne žage TCT Julia Tubotek Phantom

TCT Tubotek Phantom

Material: HM – Coating: PVD
Stationary saw pipe & tube

TCT HM P.V.D. Coated circular saw blade, used for cutting tubes with wall thickness greater than 3 mm, in medium or high carbon steel, and stainless steel, on automatic sawing machines. A higher cutting speed can be achieved than with HSS saw blades. Tubotek Phanton guarantees high-performance cutting of thin-walled tubes, obtaining perfect surface and burr-free pipes.

Link (Datasheet): www.juliautensili.com/tct-hm-and-cermet-circular-sawblades/

List krožne žage TCT Julia Stahltek Apache

TCT Stahltek Apache

Material : HM – Coating : PVD
Stationary saw solid material

TCT HM P.V.D. Coated circular saw blade, with tungsten carbide teeth, pvd coated, used for mild or high carbon or stainless steel cutting, solid material or thick-walled pipes, on stationary machines like Amada, Nishijima, Tsune, Kasto, Everising. Suitable for high-demanding applications.

Link (Datasheet): https://www.juliautensili.com/tct-hm-and-cermet-circular-sawblades/

List krožne žage TCT Julia Stahltek Predator

TCT Stahltek Predator

Material: CERMET
Stationary saw solid material

TCT CERMET circular saw blades, with cermet teeth, not coated, used for low or mild carbon steel cutting, solid material or thick-walled pipes, on stationary machines like Amada, Nishijima, Tsune, Kasto, Everising. Not to be used to cut stainless steel.

Link (Datasheet): www.juliautensili.com/tct-hm-and-cermet-circular-sawblades/

List krožne žage TCT Julia Rototek Hornet

TCT Rototek Hornet

Material: HM – Coating: PVD
Orbital cutting pipe & tube

TCT HM P.V.D. Coated Re-sharpenable circular saw blade used for cutting tubes with wall thickness greater than 3 mm. These saw blades have been designed for orbital flying cut-off applications on tube mills. Key features of these products are fracture resistant carbide tips and low vibration during the cutting process. The result is a very long blade life when used on machines such as: Kusakabe, Linsinger, Mair, Nakata, Oto Mills, Sms-Meer.

Link (Datasheet): www.juliautensili.com/tct-hm-and-cermet-circular-sawblades/

List krožne žage TCT Julia Jointek Intruder

TCT Jointek Intruder

Material: HM – Coating: PVD
Flying cut-off with I.D. scarf

TCT HM P.V.D. Coated circular saw blade. One of the industry challenges is to remove welding residue inside pipes, which drastically compromises the cutting, and thus the blade life. This problem decreases the life of the circular saw blade by damaging the carbide tip, especially on standard TCT saw blades.
Due to its special design and reinforced tooth form, Jointek Intruder has a very specific tooth geometry in order for it to withstand heavy-duty cutting cycles with violent bumps, on continuous welded pipes.

Link (Datasheet): www.juliautensili.com/tct-hm-and-cermet-circular-sawblades/

List krožne žage TCT Julia Flytec Reptor

TCT Flytec Reptor

Material: HM – Coating: PVD
Flying saw pipe & tube

TCT HM P.V.D. Coated circular saw blade used for cutting steel tubes with wall thickness greater than 3 mm, on flying cutting machines (single or twin). The special geometry reduces vibration during the cutting process and helps the chip evacuation.

Link (Datasheet): https://www.juliautensili.com/tct-hm-and-cermet-circular-sawblades/

Would you like to receive an offer? Contact us at info@cajhen.com or 03/5731 502.

HSS and TCT saw blades by Julia

Julia HSS >

Julia TCT >

Newsletter sign-up

Newsletter
sign-up